Energy Savings from the Sun

Glass Evacuated Solar Collector (15 tubes)

Evacuated Solar Tube Controller

This is the best solar collector in the market, using 15 of our 1.8 metre solar tubes. These are long lasting, reliable, efficient twin-glass evacuated tubes with two different absorbsion and reflection coated layers to provide maximum solar radiation absorption. Our evacuated tube collectors are designed to reach very high temperatures of around 230°c for rapid heat transfer, whilst the outside of the tube is cold to the touch. This minimises heat loss into the solar fluid manifold. The collector comes complete with a roof mounting kit. The modular construction means that replacement tubes can be installed simply and quickly without draining the plumbing.

Each collector tube is made from strong borosilicate glass and vacuum insulated so that the inner layer absorbs the maximum solar radiation. It’s a double walled design and contains a special solar filament/absorption layer, aluminum heat transferring fins and a copper heat pipe condenser. They are sealed tight creating a smooth, nearly seamless casing which works to create a vacuum effect that prevents heat from escaping.

£838.00

300 Litre Solar Hot Water Cylinder

Solar Hot Water Cylinder

Solar Unvented Stainless Steel Cylinders

This 300 litre capacity unit allows you to connect the cylinder directly to the mains water supply via pressure limiting safety valves to provide 3 BAR water pressure for showers without the need for noisy shower pumps. The cylinder is factory tested to 12 BAR and requires no cold water tank in the loft. Two stainless steel primary coils are used to indirectly heat the water; the bottom one heated by the solar collectors and the top one via the boiler system. The cylinder comes with an integral immersion heater and three temperatrure sensor ports to measure the secondary circuit water at the bottom, middle and top of the cylinder. The cylinders have a 25 year guarantee on the vessel and 2 years on the components parts.

£1,125.00

Solar Pumping Station

Solar Pumping Station

This pumps the solar heat transfer fluid through the Collector and to the hot water cylinder. The unit is designed for a fast and easy installation of a solar heating system and combines an insulated pump and flowmeter for maximum efficiency.

£350.00

15mm Pipe Insulation

15mm Pipe Insulation

High temperature 19mm thick black foam rubber pipe insulation suitable for external use on pipework with a 15mm diameter. The insulation comes in 2 metre lengths and will withstand temperatures to 150°c.

£13.44

22mm Pipe Insulation

22mm Pipe Insulation

High temperature 19mm thick black foam rubber pipe insulation suitable for external use on pipework with a 22mm diameter. The insulation comes in 2 metre lengths and will withstand temperatures to 150°c.

Total length per piece is 2 metres.

£16.11

Tile Upstander

Tile Upstander

For on-roof installations the tile upstander allows access through the roof for the pipe work whilst maintaining the integrity of the roof covering.

£11.22

Heat Transfer Liquid

Heat Transfer Liquid

The HeatingSave heat transfer fluid is a non-hazoudous food-grade anti-freeze containing Propylene Glycol, as tested by CNAL and CMA. It is packaged in a 5 litres plastic bottle. When mixed with water it is used as the media to transfer heat from solar collectors to the rest of the solar water heating system. The freezing point of the transfer liquid is -60°c. With a 1:1 mixture with water this is increased to -34°c whilst a 1:2 antifreeze volume/water volume protects to -16°c.

£35.00

Solar Heating Expansion Vessels 4 Litres

Solar Heating Expansion Vessels

Solar heating expansion vessel for a sealed unvented heating system. This is normally on the primary circuit, but can be on the secondary circuit for pressurised hot water cylinders, especially twin-coil solar cylinders. The vessels have carbon a steel body with red epoxy polyester paint finish. Maximum system temperature is 99ºC and max pressure of 8 bar. 22mm threaded connection.

This vessel has a capacity of 4 litres.

£26.24

Solar Heating Expansion Vessels 12 Litres

Solar Heating Expansion Vessels

Solar heating expansion vessel for a sealed unvented heating system. This is normally on the primary circuit, but can be on the secondary circuit for pressurised hot water cylinders, especially twin-coil solar cylinders. The vessels have carbon a steel body with red epoxy polyester paint finish. Maximum system temperature is 99ºC and max pressure of 8 bar. 22mm threaded connection.

This product has a 12 litre capacity.

£31.82

Solar Heating Expansion Vessels 18 Litres

Solar Heating Expansion Vessels

Solar heating expansion vessel for a sealed unvented heating system. This is normally on the primary circuit, but can be on the secondary circuit for pressurised hot water cylinders, especially twin-coil solar cylinders. The vessels have carbon a steel body with red epoxy polyester paint finish. Maximum system temperature is 99ºC and max pressure of 8 bar. 22mm threaded connection.

This vessel has a capacity of 18 litres.

£36.24